How to fix RC mini car dynamo is broken
10 Dec 2017
How to know the dynamo of damaged RC car and how to fix it will be discussed now. Damage to the RC car is quite disturbing one of the rear wheel dynamo is jammed.
There are several symptoms to recognize this damage. Usually we do not realize, and misdiagnose. What are the symptoms of a broken RC car dynamo and how to fix it? Immediately, we start ....
Symptoms of the car dynamo RC is damaged
Characteristics of damage to broken brush parts and wear connectors:
-With full battery condition, slow rear wheel speed and for the front wheel is not problematic.
-The car sometimes stops suddenly, pushed the way back.
-The battery's battery quickly runs out
How to fix it:
- Replace the broken brush, you can buy at the shop that sells the spare part of the tamiya car. Usually some plate, see how to make it
-Connector wear, replace with new connector. You can search for a second-hand dynamo from a broken toy. Take the connector part, release the coil end with the solder.
-If the dynamo and other components are not problematic, battery voltage is durable.
Characteristics of the deterioration of the loose dynamo windings and weak magnetic power
-When the rear wheel is lifted, the spin is fast. But on the floor to the floor.
-The first RC car was very fast, a few seconds later.
-The battery's battery quickly runs out
How to fix it:
-Clean the tube part of the dynamo and magnet with thinner or washbensin. Dry it and try installing again.
-If it's cleaned still problematic, replace the magnet or winding.
-Strengthen coil by dripping iron glue into the coil to taste.
That's how to analyze and improve the RC car dynamo. If there are any shortcomings or errors, please correct them and suggest. Thank you for reading to the end.
There are several symptoms to recognize this damage. Usually we do not realize, and misdiagnose. What are the symptoms of a broken RC car dynamo and how to fix it? Immediately, we start ....
Symptoms of the car dynamo RC is damaged
Characteristics of damage to broken brush parts and wear connectors:
-With full battery condition, slow rear wheel speed and for the front wheel is not problematic.
-The car sometimes stops suddenly, pushed the way back.
-The battery's battery quickly runs out
How to fix it:
- Replace the broken brush, you can buy at the shop that sells the spare part of the tamiya car. Usually some plate, see how to make it
-Connector wear, replace with new connector. You can search for a second-hand dynamo from a broken toy. Take the connector part, release the coil end with the solder.
-If the dynamo and other components are not problematic, battery voltage is durable.
Characteristics of the deterioration of the loose dynamo windings and weak magnetic power
-When the rear wheel is lifted, the spin is fast. But on the floor to the floor.
-The first RC car was very fast, a few seconds later.
Related:
How to fix it:
-Clean the tube part of the dynamo and magnet with thinner or washbensin. Dry it and try installing again.
-If it's cleaned still problematic, replace the magnet or winding.
-Strengthen coil by dripping iron glue into the coil to taste.
That's how to analyze and improve the RC car dynamo. If there are any shortcomings or errors, please correct them and suggest. Thank you for reading to the end.
